Installing a Brick Paver Walkway or Cement Hollow Bricks

Using Installing a Brick Paver Walkway or Decorative Brick Blocks or Pavers to produce a pathway or outdoor patio complements a home in a manner in which is unrivaled. It adds a level of quality and elegance to a house entryway that can not be accomplished with either concrete or asphalt. Brick and Pavers also come in several colors and shapes permitting unique color design and patterns to be attained. In addition, setting up a Brick or Paver pathway does not necessarily need a pro. With some fundamental knowledge and a reasonably basic pathway plan, a homeowner can undertaking such a project.

The key to setting up a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be set up. In addition, string lines should be strung on each side of the pathway.
Once the area has actually been dug down, 3/4" gravel stone must be laid in and tamped down tightly. Then 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust must be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipeline or ledger board the length of the pathway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your sidewalk border and help to maintain the integrity and shape of the walkway.

Once this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist preserve the integrity of the pathway.

When building the sidewalk, undoubtedly bricks/pavers will need to be cut or split. Unless you wish to purchase or rent an expensive wetsaw, I would recommend acquiring an easy brick/paver splitter. It is basically a chisel with a large end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you want to break the brick. Using a hammer strike the butt end of the sculpt strongly. You might require to do this a number of times. You may also wish to turn the brick/paver over and strike the other side of the brick utilizing the hammer and chisle. Within one or 2 strikes the brick/paver should break easily. , if your pathway has curves you will need to buy/rent a wetsaw.

.

After setting up the get more info bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down firmly.
Lastly, spread stone dust over the new pathway and sweep into the fractures. Repeat this process a number of times to make sure the fractures are fully filled. This will complete the interlocking of the bricks and help to get rid of any weed growth. Just add yard seed to the outside edges and you should have a gorgeous entrance to your home within a couple of weeks.


In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipeline or ledger board the length of the walkway on either brick crusher side of the walkway. These strips will act as your sidewalk border and aid to preserve the integrity and shape of the walkway. Undoubtedly bricks/pavers will require to be cut or split when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *