Installing a Brick Paver Walkway or Bricks Buy

The use of Bricks or Pavers to create a pathway or patio area matches a home in a way that is unequaled. In addition, setting up a Brick or Paver sidewalk does not always need a pro.

The key to installing a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be installed. The location needs to be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines ought to be strung on each side of the sidewalk. The string lines show the ended up height of the sidewalk.
Once the location has been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust should be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline should equal the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will act as your pathway border and assistance to maintain the integrity and shape of the here walkway.

The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the stability of the walkway.

Undoubtedly bricks/pavers will need to be cut or divided when developing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your walkway has curves you will need to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with additional sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the new sidewalk and sweep into the fractures. Repeat this procedure read more a couple of times to make sure the cracks are totally filled. This will finish the interlocking click here of the bricks and help to eliminate any weed development. Just add grass seed to the outside edges and you ought to have a gorgeous entryway to your home within a number of weeks.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The key to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or ledger board the length of the walkway on either side of the walkway. These strips will act as your walkway border and aid to preserve the stability and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *